Setting up TATA SKY DISH Right to recive TS channels

1) Fallow my other post

Watch Free to Air channels

and bring up the LNB settings menu.

2) Now select Insat 4a- 14 as the satellite under manual tuning.

3) Press Yellow button to edit the TP entries.

4) Input below values for

a) Frequency 10970 or 11050 etc.
b) Symbol rate 28500
c) polarization Horizontal (H)
d) FEC as 5/6

and save the settings. Now you can see Signal Strength screen.

Adjust the dish at 83 degree east until you see TATA SKY name appears in the red colored bar below signal level.

See the figure no 5 in my other posting.

Note: More the signal level and lesser the BER is the ideal setting to get good clarity.

That's it, Now wait till the software gets updated in case you have shut it ( not used TS ) for too long time and press any valid channel number and you should be able to see it.

In case you have zero/negative balance left then recharge your account and enjoy the expensive channels !! once again.